Tomorrow Kings General discussion

makes sense but would like to hope we get a story.

Same here, it would be nice to see where and how these deathmask came about.

It will b better is everyone can buy it rather than just being sold as toy soul exclusives. Hope they hve a bamba version. I like the red hair or is it lighting

^ I think these are for Bamba and toy soul since the promo says Bamba Toy Soul Premade. if it were an exclusive I think it would have said 3a exclusive toy soul premade

I think just like Ash Tk and Bo-tq for Thai toy expo, they dropped both at show and Bamba...
(hopefully.

3a_boltman wrote:Ninja TQ death mask was a first. but this 2-pack will be first in peoples hands at the show. So in a way yes.

no the other iteration are Ninja, archer heavy etc. Ash mean The classic TK and TQ the first.

Will keep my figure cross and hopefully can purchase a set on bamba

it said bamba, so I too scare about that. Ash seem to put the con exclu on bamba now special the sure big hit. Like TK

I bet on Premade solo version TQ or TK and a 2 pack TK and TQ on preorder.

Ash said it multiple time TK and Pasha are the Big seller on Threea. mostly one of the only who make profit.

cutting this postion of the market would be incredibly silly

Bamba, Toy Soul Premade. that's what it says 

liberator fuu 
liberation 
as a construct
2 pack

the promo pretty much says a pre-order for this 2pack on Bamba and toy soul

2 cracked hoses out of the box, but not so terrible when on display. My figure is nice and tight, but my only comment is that when they applied the silver paint they must have put the figure immediately in the box. There is more silver paint on the top and bottom clam shell than there is on the figure, but thankfully there is no paint loss on the figure. Does anyone else have this as well?

this more looks like special effects didn't work. as in the special effects of its guts hanging out, the vinyl didn't held on firmly to the wires.

Just got this in and pics don't do the scale justice. this bothead is massive!

I'm scratching my head on how i'll show off these two. Albino did a pretty cool thing by mounting it on the wall. Maybe i'll set mine up as the thanksgiving centerpiece

Matrix wrote:Bamba, Toy Soul Premade. that's what it says 

liberator fuu 
liberation 
as a construct
2 pack

the promo pretty much says a pre-order for this 2pack on Bamba and toy soul

TQ Liberation and TK liberator fuu

Curious to see how the TQ looks, hopefully Ash post it before the sale.

With new deathmask coming online we wil have more deathmask than team 7 bones very soon, or have we gone past the magic 7.

Man,

I paid a lot of money for this bothead and I'll still have to pay more to get it out of the post office (huge taxes), if I find mine damaged (special effects, it's a disrespect on 3A's part) I'm gonna be more disapointed than I'm already am in 3A.

Every time 3A is late on shipping they go the EMS way and in my country the shipping fee is included in the amout of tax you pay (don't ask me why), then I pay the tax to get my long awayted figure home to find it flawed? It's not funny, and more, they ask you to send it back for repairs (new product being repaired ironic huh) then they send it back to me and it gets stuck in customs again.

I'll get mine on monday and if it is faulty I'll send the pics to CS but it will be hardly worth sending it back. I get why a lot of us are frustrated (I am), 3A USED to be a very good place to get different toys, I wouldn't say that now.

Respect is like a 2 way road, you need to show respect and be shown respect.
3A is not respecting us customers. Way too long waits and bad QC and an e-mail like our friend here got are proof of thay.

I'll tell you about my bothead on monday.

dbpom wrote:Man,

I paid a lot of money for this bothead and I'll still have to pay more to get it out of the post office (huge taxes), if I find mine damaged (special effects, it's a disrespect on 3A's part) I'm gonna be more disapointed than I'm already am in 3A.

Every time 3A is late on shipping they go the EMS way and in my country the shipping fee is included in the amout of tax you pay (don't ask me why), then I pay the tax to get my long awayted figure home to find it flawed? It's not funny, and more, they ask you to send it back for repairs (new product being repaired ironic huh) then they send it back to me and it gets stuck in customs again.

I'll get mine on monday and if it is faulty I'll send the pics to CS but it will be hardly worth sending it back. I get why a lot of us are frustrated (I am), 3A USED to be a very good place to get different toys, I wouldn't say that now.

Respect is like a 2 way road, you need to show respect and be shown respect.
3A is not respecting us customers. Way too long waits and bad QC and an e-mail like our friend here got are proof of thay.

I'll tell you about my bothead on monday.

My suggestion is look beyond the minor imperfections if any of the toy and just enjoy. Unlike a figure where damage may cause it not to stand, all u don't get to enjoy the whole figure, in this case as it is a static figure, it still looks very good for posing even if the wire shows. I honestly did not realise the issue until it was posted in the forum. I took it as part and parcel of the distressed look of the figure. So enjoy n happy playing with the toys cheers

I live in the same city of dbpom, I paid the same taxes.
In this head problem, just had fun gluing and painted the damaged parts.


I recommend not send anything to fix in HK. I sent a Dr DOOM for repair, even though new, and have default factory.

And they returned TWICE with the same defect.
FIGURE TRAVELED 4 TIMES RIO DE JANEIRO - HONG KONG !!

I gave up buying the ThreeA, I'm just getting what i pre-order.


This year was a huge deception. After six incredible years for me and is the end.

Just toying around...
Loper & Bothead 3AA by deeaebee, on Flickr

Great pose. How did u get it to balance at that angle, mine topples. Is there some support within the dark background that we can't see.
Anyway still looks cool

Thanks, chiowhon! I just had to stay patient, my loper body is supremely tight too, so that helped.

No tricks!

I think what they should have done with this bot head was to create the cables as a separate base piece for which to sit the bot head on. Perhaps then the cracks on the cables could have been avoided. But who knows until it's tried. Piece looks great nevertheless.

DannyB that's amazing pic, thank you for sharing!

By all means gimbat, thank you!

Gimbat, Hi!

I.m very worried about delivery of my order - HEAVY DUTY LOPER 3AA LTD SET. I wrote five letters to CS asking for the track number, but still haven't received any response. However all my friends got it already. I am from St. Petersburg, Russia. My order #: 192669

Let me know what's with my order and send the track number.

Thank you.

watch out with putting out your order info in public.